How to play Palworld with friends in co-op or on a dedicated server
Tutorials

How to Play Palworld With Friends (Invite Code vs Dedicated Server)

Invite-code co-op stops at four players and goes offline with the host. How to set up each way of playing Palworld together, and how every platform joins.

Want your own server? Palworld server hosting — plans, specs and regions.

November 20, 20267 min read
Share

On This Page

There are two ways to play Palworld with friends. You can start a co-op world and share its invite code, which lets up to 4 players play together while the host is online. Or you can put the world on a dedicated server, which holds up to 32 players, stays online when nobody is hosting, and lets Steam, Xbox, PlayStation 5 and Mac players share one world.

Which one you want mostly comes down to two questions: are there more than four of you, and do you all play at the same time?

Co-op or dedicated server: the difference

Invite-code co-opDedicated server
PlayersUp to 4, including the hostUp to 32
Online whenOnly while the host is in the gameAll the time
Where the world livesOn the host's deviceOn the server
How friends joinInvite codeServer list or IP address
CostFreeFree on your own PC, or a monthly plan with a host

If "only three people can join me" is what brought you here, that is the co-op limit and not a bug. A dedicated server is the way past it.

Skip the setup headache

Get a server running in under 60 seconds.

Configure Server

Not ready to pay? Free 2-day trial, no card →

Option 1: Invite-code co-op

This is built into the game and takes a minute.

  1. On the main menu, start a new world or select an existing one, and turn Multiplayer on in its world settings.
  2. Load into the world and open the options menu. The invite code is shown there. It's hidden by default, and the eye icon reveals it.
  3. Send the code to your friends.
  4. They choose Join Multiplayer Game (Invite Code) on the main menu and enter it.

What to expect:

  • Four players is the cap, host included.
  • The code changes each session, so send a fresh one each time you host.
  • The world goes offline when the host leaves. Nobody else can play in it until the host is back.
  • Everyone has to be on the same version of the game. After a patch, the whole group updates before anyone can join.

For two or three friends who always play together, this is all you need.

Option 2: A dedicated server on your own PC

Pocketpair publishes a free dedicated server for Palworld. It runs the world on its own, so friends can join whether or not you are playing, and the limit rises to 32.

It asks more of the machine than most games' servers. Pocketpair's documentation recommends 16GB of memory and at least 4 CPU cores, and says of 8GB that it will boot but is more likely to crash from running out of memory. On top of that you need to:

  • Forward UDP port 8211 on your router.
  • Set a ServerPassword so the server is private, and an AdminPassword for yourself.
  • Check CrossplayPlatforms. The default allows Steam, Xbox, PS5 and Mac.
  • Keep the PC on for as long as you want the world available.

If anyone in the group is on console, there is one more step. Xbox and PS5 players can't type an IP address. They can only join by finding the server by name in the in-game community server list, so a self-hosted server has to be started with the -publiclobby flag and have UDP 27015 forwarded as well. A password still keeps strangers out. How to make a private Palworld server explains that setup in full.

Option 3: A hosted dedicated server

A hosted server is the same dedicated server on a machine in a data centre. The world is online around the clock, nobody's home PC or connection is involved, and the settings are on a dashboard instead of in a config file.

On our Palworld server hosting, every plan includes all 32 player slots, so you choose by how much memory the world needs and not by how many friends you have. Community-list visibility is handled for you, which is what lets console players find the server. The Starter plan has 8GB of RAM and costs $12.99/month, and you can try a Palworld server free for 48 hours without a card to see how it runs for your group.

Already have a co-op world with hours in it? It can be moved. See how to move a Palworld co-op world to a dedicated server.

How each platform joins a dedicated server

PlatformHow to join
Steam (Windows) and MacJoin Multiplayer Game, then connect by IP:port or find the server in the community list
XboxFind the server by its exact name in the community server list
PlayStation 5Find the server by its exact name in the community server list
PC Game Pass / Microsoft StoreSame as Xbox. These versions count as Xbox, not Steam

The server only accepts the platforms that are switched on under Crossplay Platforms. The most common mistake is a Steam-only server with a Game Pass player trying to join it: Game Pass on PC counts as Xbox.

How much RAM a Palworld server needs

Palworld servers use more memory than most survival games, and usage climbs over a long session as bases and Pals build up.

Your worldServer RAMOur plan
A few friends, one modest base8GBStarter, $12.99/month
An active group with several bases16GBPro, $21.99/month
A full 32-player world24GBBeast, $31.99/month

If you are unsure, start small and move up when the world needs it. How much RAM a Palworld server needs has the reasoning behind these sizes.

Common problems when joining friends

Only three friends can join. You are in invite-code co-op, which stops at four players in total. Move to a dedicated server for more.

The invite code doesn't work. The host has restarted the session and the code has changed, or the host is no longer in the world.

A console friend can't find the server. Check that their platform is enabled under Crossplay Platforms, then have them search the community list for the exact server name. They can't join by IP.

A Game Pass friend can't join a server that Steam players can. Enable Xbox in Crossplay Platforms and restart the server.

Nobody can join after an update. Versions don't match. Platforms don't always get a patch at the same moment, so check that the server and every player are on the same version.

If none of those fits, work through our players can't join checklist.

The short version

Two to four of you who always play together: start a world with Multiplayer on and share the invite code. More than four, friends on different schedules, or a mixed PC and console group: use a dedicated server. Run Pocketpair's free one on a PC with memory to spare, or take a hosted Palworld server with all 32 slots included. You can try one free for 48 hours first.

Frequently Asked Questions

How many players can play Palworld together?

Up to 4 in invite-code co-op, including the host, and up to 32 on a dedicated server.

Can you play Palworld with more than 4 friends?

Yes, on a dedicated server. The four-player limit only applies to the co-op worlds you host from the main menu.

Is Palworld crossplay on a dedicated server?

Yes. A dedicated server can accept Steam, Xbox, PS5 and Mac players at once, as long as each platform is enabled in its Crossplay Platforms setting.

Do my friends lose the world when I log off?

In invite-code co-op the world is only available while the host is playing. On a dedicated server it stays online for everyone.

Where do I find the Palworld invite code?

In the options menu once you are in a world that has Multiplayer turned on. It's hidden until you click the eye icon next to it.

Can Xbox or PS5 players join a server by IP address?

No. Console players join by finding the server by name in the community server list. Steam and Mac players can connect by IP.

Skip the setup headache

Get a server running in under 60 seconds.

Configure Server

Not ready to pay? Free 2-day trial, no card →

Or see plans, specs and regions on Palworld server hosting.

Playing from Australia or New Zealand? Palworld server hosting in Australia.

Related Help Articles

Need step-by-step instructions? Check out these guides in our Help Center.